This solvent-free oil finish provides a protective, water-resistant surface. Use on new wood that is bare, stained, milk painted, mineral painted, or to revive old wood finishes.
Hemp oil penetrates to protect from the inside out. It does not leave a surface film that will chip or scratch. This food-safe, oil finish is perfect for use in the kitchen on wood or stone. Used outside, it can restore the luster of old oil-based paint or revitalize surfaces such as cast iron. Test on an inconspicuous spot prior to using on an entire piece.
Surface must be clean and dry. Apply a small amount of oil to surface using a clean cloth or natural-bristle brush--or even just your hands! Rub gently until it the oil is absorbed into raw wood or paint finish. For additional sheen and protection, add 2-4 coats. With no solvents, drying time is extended, so allow 2 hours between coats and wipe away excess after 12 hours Finished piece may take several days to cure. To maintain, apply a light coat every other year as needed. To remove scratches, lightly sand blemish, then reapply oil.